"CPhP-3" - PHOSPHATING CONCENTRATE FOR ANTICORROSION PROTECTION
Corrosion will not pass!
Contact:
Innovation division
phone/fax: (+375 17) 2095303
e-mail:
www.fhp.bsu.by

Research Institute of Physical-Chemical Problems of the Belarusian State University  
Address: 14, Leningradskaya str.,220050 Minsk,
Republic of Belarus

Technical specifications: TS RB 100050710.029-2000

Purpose

The concentrate is used for anticorrosion protection of the steel surfaces and improvement of adhesion before spraying of varnish-paint and powder coatings. Three-cationic phosphate structure forms on a metal surface a modifying zinc-phosphate coating.

Application

  • mechanical engineering
  • instrument-making industry

    • Characteristics of CPhP-3 and phosphate coating on its basis

    State

    Transparent or a little cloudy liquid of green color
    Density at 20 °C, g/sm3

    1,45–1,55
    Concentration, g/l

    24-30
    Mass of phosphases % (P2O5), %

    18-21,5
    Mass of Zinc and Nickel, %

    10,5-13,5
    Mass of Nitrites (NO3), %

    4,5-6,5
    Total acidity in arbitrary units, «points»

    17-24
    Free acidity in arbitrary units, «points»

    1,5-4
    Working temperature, °C

    30-35
    Working time, min

    2-10
    Mass of coatings, g/m2

    1-6
    Corrosion resistance (probe of Akimov), min

    2–5

    Safety requirements

    The concetrate is a hazardous substance of the dangerous class 3 of Standard 12.1.007. It is necessary to work in rubber gloves, eye protectors, respirators, protective costumes.

    Storage

  • at temperature not less then 20 °Ñ in the foreseen by technical conditions container in the closed view
  • warranty period of starage – 1 year since day of production

    • Advantages by usage of CPhP-3

    • high protective anticorrosive properties of fine-crystalline zinc-phosphate coating produced at operation temperature 30-35 °Ñ
    • reduced sludge formation
    • decrease of power resources on heating of a phosphate treatment bath
    • cost reduction in 5 times in comparison with known foreign analogues
    • stability of concentrate during storage and phosphate treatment
    • improvement of the process ecological characteristic of phosphate treatment at the expense of quantity reduction of sludge formed during process of phosphate treatment
    • simplicity of implementation and equipment

    Implementation

    The concentrate is tested on production union «MTZ», joint stock company «Atlant», on some enterprises of Russia of mechanical engineering and instrument making complexes.

    Forms of cooperation

    Concluding of agreements on production of concentrate

 
 
For additional information please contact us at:
phone: (+ 375 17) 2928342
fax: (+375 17) 2327183
e-mail:		 Ministry of Education for the Republic of Belarus