| FLEXIBLE MANUFACTURING SYSTEM FOR REFACING OF HIGH-WEAR MACHINE UNITS |
|
|
 |
|
Contact:
V.M.Konstantinov
Phone: (+375 214) 531047
Fax: (+375 214) 530679
e-mail:
www.psu.by
|
|
Polotsk State University
Address: 29, Blokchin str., 211440, Novopolotsk,
Republic of Belarus
|
|
|
|
|
Purpose and area of application
Flexible manufacturing system is intended for refacing and hardening of high-wear machine units. It is used a diffusion alloying (doping) of fusing powders.
The system can be applied in conditions of repair departments and workshops of machine-building enterprises.
|
 |
|
Technical characteristics of device for diffusion doping of fusing powders
| Working temperature of diffusion doping, °C |
600–1000
|
| Working frequency of container rotation, min-1 |
80
|
| Volume of container, dm3 |
0,75
|
| Weight of the treated powder set, kg |
1,0-3,0
|
| Full time of diffusion doping a set of powder, h |
1,0–1,5
|
| Output of device, kg/h |
1,0–3,0
|
Advantages
- it allows to realize a full cycle of restoration and hardening of machine units, including manufacturing the powders required for fusing;
- opportunity of usage of metal chips as raw material for a powder (including chips of grey cast iron);
- opportunity of restoration, hardening of the wide nomenclature of machine units due to universality of equipment;
- significant reduction of expenses for restoration due to usage of own raw material;
- improvement of a coating quality due to usage of a special powder.
|
|
|
| |
|
|
Transfer center of technologies |
|
tel.: (+ 375 214) 538404
e-mail: |
|
Polotsk State University |
|
|
 |
|
phone: (+ 375 17) 2928342
fax: (+375 17) 2927183
e-mail: |
|
Ministry of Education for the Republic of Belarus |
|